Hobbywing EzRun Max10 Brushless ESC without sensor
Really good ESC for beginners and experienced RC drivers, suitable for 1/10 touring cars and 2WD 1/10 trucks with brushless motor without sensor. The ESC is with an XT60 connector.
When you pair the Max10 with a Hobbywing EzRun 3652/3660 G2 motor, the temperature sensor cable on the ESC monitors engine temperature in real time and protects the engine from damage caused by overheating.
The ESC can be easily set with the SET button, but a Hobbywing LED or LCD Program Card, as well as the OTA Programs Bluetooth module opens up more settings and adjustment options (purchased separately).
The EzRun Max10 uses a Motor Thermal Protection circuit (in Sensorless Mode)
When pairing the Max10 with a Hobbywing matching motor (i.e. EzRun 3652/3660 G2 motor), the temperature sensor cable on the ESC will monitor the motor temperature and protect the motor from irreversible damage due to overheating in real time.
Capacitor Thermal Protection
The capacitor thermal protection first implemented in the Hobbywing EzRun Max10 will effectively protect capacitors from diaelectric failure causing irreversible damage to the ESC due to overload.
High Reliability & Durability
Built with high-quality components and coupled with cutting-edge firmware, the EzRun Max10 is able to deliver unmatched power and performance for even the most extreme racing applications, but it is also responsive enough to protect itself from damage due to overloading due to physical abuse, overuse or even human error.
Super Internal BEC
The built-in switch mode BEC with a maximum output of 6A and voltage adjustable between 6V and 7.4V allows the use of various high voltage servos.
Applicable to All Weather Conditions
The waterproof and dust-proof design allows the Hobbywing EzRun Max10 to be used in all weather conditions without any issue of damage caused to the ESC from water or debris.
Advanced and Secure Electronic Switch
The EzRun Max10 features an electronic switch with a lifespan of over 50000 on/off cycles, housed in a completely waterproof, dust-proof and shock-resistant design.
Regular Firmware Updates Free of Charge
You can upgrade the EzRun Max10 with the Hobbywing WiFi/USB LINK software, a WiFi module/ LED or program box and a smartphone/laptop. Hobbywing updates its ESC firmware regularly giving you upgraded features more often when available.
Wires & Connectors
- Motors: Sensorless Brushless Motors / Sensored Brushless Motors (only in SL mode)
- Vehicles: 1/10 Buggy, On-road, and Light-weight 2WD Short Course Trucks, Truck and Monster Trucks
- Brushed/Brushless: BL
- Sensored/Sensorless: SL
- Waterproof: Yes
- Cont./Peak Current: 60A/450A
- Input Voltage: 2-3S LiPo/6-9 Cells NiMH
- BEC Output: Switch Mode: 6V/7.4V,3A
- KV Rating/T Count: 2S LiPo: KV≤6000;3S LiPo: KV≤4000 (3652 Series of Motors)
- Size: 39.4x32.8x23.1mm (w/o Fan)
- Weight: 67.8g
- Input Wires: Red-14AWG-200mm*1/Black-14AWG-200mm*1
- Output Wires: Black-14AWG-200mm*3
- Input Connectors: No
- Output Connectors: 3.5 Bullet Connectors (Female)
(Note: All the wire length above is the original length not the length you see from the outside.)
ESC Programing via
- Size: 25.0x25.0x10.0mm
- Voltage Range:5-7.4V
- Powered by: BEC
- SET Button on ESC: Supported
- LED Program Box: Supported
- LCD Program Box: Supported
- WiFi Module: Supported
- Program Port: PRG/Fan Port
- Firmware Upgrade: Supported