The sensorless and brushless Hobbywing EzRun 3660 G2 motors offer very high torque and power, that works well for novice and experienced RC drivers looking for more fun and speed when bashing or racing. The EzRun 3660 offers more torque compared to the shorter 3652 and is designed for 1/10 scale 4WD Short Course Trucks and Monster Trucks.
A lower kV provides more torque for racing in the terrain, while a higher kV provides more revs and more speed for lightning-fast acceleration and top speed, but costs a little on the torque in the terrain.
The 4 pole design will guarantee the motor to produce very large amounts of torque, a much faster acceleration response and a very stable output of power to the drivetrain.
Low Cogging Torque
The first motor with the innovative 4-pole-8-magnet "staggered pole" rotor (Hobbywing patented design) has the extremely low cogging effect and low torque pulsation (reduced by 85% when comparing with conventional 1/10 scale 4-pole motors).
Motor Thermal Protection
When pairing the EzRun 3660 G2 with a Hobbywing EzRun MAX10-SCT or MAX10 ESC, the built-in temperature sensor and sensor port at the load end (for connecting to ESC) will make the motor thermal protection available to protect the motor from damage due to overheat.
The O-ring seal fitted between the front end bell and motor case isolates screw holes from inner parts to prevent liquid or dust from getting inside and protect motor from damage. The special design implemented by the motor case (the end attaches to the front end bell) isolates inner coils from outside to protect winding from being damaged by overlong screws.
Hobbywing’s temperature control technology has been designed to protect the motor from being damaged by heat thus less heat more efficient the motor will run and perform. The output performance of this motor has an efficiency rate of up to 90%, a leading level in the RC world.
Quality Materials & Excellent Design
The use of double insulated windings (240℃ R-leveled), high-intensity adhesive (340℃), Japanese bearings and silicon steel sheets guarantees users the outstanding performance and super durability. The wheel hub design of the front & rear end bells reduces the motor weight.
Compatible (with the EZRUN MAX10-SCT and MAX10 ESC)
When pairing the EzRun 3660 G2 motor with a Hobbywing EzRun MAX10-SCT or MAX10 ESC, the excellent match between ESC and motor will give you large torque plus a very smooth and linear power band.
- Applications: 1/10 4WD Short-course Trucks and Monster Trucks
- Scale: 1/10
- Brushed/Brushless: BL
- Sensored/Sensorless: SL
- Pole Count: 4
- KV Rating: 3200
- LiPo Cells: 2S-3S
- No-load Current(A): 4.9
- Outer Dia. (mm): 36 (1.417in)
- Length (mm): 60 (2.047in)
- Shaft Diameter (mm): 5 (0.196in)
- Weight (g): 262 ( 7.69oz)
- Timing: 0